What issues should be paid attention to when using the shearing machine?

Before operating the shearing machine, you must receive strict safety training and be familiar with the instruction manual of the shearing machine of this model. Before starting the shearing machine each time, be sure to carefully check the condition of the equipment to ensure that the knife is sharp and undamaged, the presser foot is securely fastened, and the safety protection devices such as protective covers and photoelectric protectors are intact and effective and function normally. Any abnormalities must be eliminated first; the operator must wear qualified protective glasses and anti-cut gloves, wear tight work clothes, and it is strictly forbidden to operate the buttons with gloves.

When the material is fed into the shearing machine, the fingers must be kept away from the blade area, and the sheared plate must be firmly pressed to prevent it from suddenly tilting or sliding and causing accidents; the start button must be operated with both hands at the same time, and no part of the body should be close to the moving parts. It is strictly forbidden to put your hands or tools into the dangerous area of the shearing machine, such as under the blade. Once abnormal conditions such as jamming or abnormal noise of the equipment occur, the emergency stop button must be pressed immediately, and the equipment can only be processed after it stops completely and the energy is locked. The gap and shearing force of the shearing machine should be accurately set according to the thickness and hardness of the material to be sheared to avoid overloading the tool or chipping the blade to damage the equipment.

After using the shearing machine, the table and surrounding metal waste should be cleaned in time, the work area should be kept clean and tidy, the shearing machine should be lubricated and maintained regularly according to the regulations, and the wear of key components should be checked to ensure that the shearing machine is always in good operating condition. Operating a shearing machine requires high concentration, and any negligence and fatigue work may have serious consequences.